ManageDsk --------- DSK file manager. Allows to manipulate DSK files like virtual disks. Usage is quite simple: 3 buttons at the bottom of the interface allow respectively - Click on "Create DSK": Create a virtual disk format blank DATA - Click on "Read DSK": Load a DSK as a virtual floppy - Button "Save DSK": Saving the virtual floppy to DSK file format. The central window shows a summary of the files on the virtual disk, with: - The name of the file, - The user number, - The write protection attribute, - File hidden attribute, - The type of the file, - The size of the file. For more information about a file, simply do a "Right click on it." A pop-up appears with the information on the selected file. From this popup, it is possible to change directly certain parameters of the file as: Its starting address, Its point of entry, Its attributes (read-only and hidden file). The buttons below the window allow the manipulation of files: - Click on "Add file (s)": Enables the addition of 1 or more files virtual floppy. Selecting multiple files is done using of the standard Windows interface (CTRL key held down). - Button "Export File (s)" Retrieves the virtual floppy One or more files. Just select the window or export files (by holding down the CTRL key in the case of multiple files) and click on the button. We can rename each files before export. - Button "Rename File (s)": Rename one or more files virtual floppy. Just select the window or export files (by holding down the CTRL key in the case of multiple files) and click on the button. We can then edit the file name and the number of User. - "Delete File (s)": Delete a file or files the virtual disk. Just select the window or export files (by holding down the CTRL key in the case of multiple files) and click on the button. Confirmation of suppression will be required for each file. The check box "automatic cleaning of headers AMSDOS format" allows to clear (fill with zeros) the unused bytes in the header AMSDOS basic or BINARY files. This option lets you save space in compression of a file in ZIP format DSK example. This works both ways: import files into Virtual Floppy and for export to the PC hard drive. Command line ----------------- Since version 0.8, ManageDsk can be used from the command line, or from a batch file (. BAT or. CMD) when it is launched with one or several arguments, it does not open the interface, but performs the functions that are specified on the command line. The parameters accepted by the command line are: -Ldskname: read a DSK file. -C: Create a blank DSK -Afilemasks: add one or more files to. DSK. The files are added as is, without creation / modification of the header AMSDOS possible they may contain. -Sdskname: saves the dsk under a particular name -Ifullpathname/fichierCPC/type/debut/execution: Add a file specifying the information to be written in the header AMSDOS: file type, start address and port of entry (execution address). Examples:-IC:\MYFILE/TOTO.BIN/BIN/16384/16384 -I"D:\documents and settings\foo\my ecran.src"/ECRAN.SCR/BIN/49152 -IC:\testbasic/PROG.BAS/BAS/368 -IC:\file/test/ASCII For ascii files, no need to specify starting address and execution. The arguments can be followed on the command line, and must be separated by spaces. A typical example of creating a dsk, adding binary files, then save this dsk as the toto.dsk: ManageDsk -C -A*.BIN -Stoto.dsk Another example: Reading a dsk, adding .BAS and .BIN files and saving : ManageDsk -LOld.dsk -A*.BAS -A*.BIN -SNew.dsk Note: - Each command (argument) starts with the character '-' (minus character) - The command options (file name) must be joined to the control (no spaces) - Orders can be entered in uppercase or lowercase. - For the moment, five commands are known: -L: Read DSK -C: Create DSK -A: Adding files to DSK -S: Save DSK -I: Adding a file with optionally specifying the parameters of the AMSDOS header Read/write directly on 3.5-inch disk ------------------------------------ Since version 0.15, ManageDsk can read/write directly to 3.5-inch floppy disks. This allows for example: - Read a 3.5-inch disk and create the corresponding DSK, - Dsk read a file and write it to 3.5-inch disk in order to use the 3.5-inch disk of CPC This is possible by using the driver fdrawcmd.sys Simon Owen. It is therefore necessary to install this driver to use these new features read/write direct. fdrawcmd.sys is not delivered in the archive, but is free disponnible at the following address: http://simonowen.com/fdrawcmd Management versions ------------------- Version 0.6 (25/02/2005) ------------------------ Corrections: - Ability to minimize the interface - Import ASCII: ASCII when forced, remove the header if it exists AMSDOS - Importing an ASCII file mode 'user choice', if passage binary addition of the header AMSDOS - Added button "save as" and change the button "save dsk" which directly saves the existing file by overwriting. Version 0.7 (26/02/2005) ------------------------ Corrections: - Problem with backup of the table directories on disk with sectors interleaved set. Version 0.8 (02/03/2005) ------------------------ - Ability to change the attributes "Read Only" and "Hidden" from each files on a. DSK - Management of the command line (useful for batch files) Version 0.9 (07/03/2005) ------------------------ - Fixed bugg when displaying information on an ASCII file - Added "double click" on a file that has the same functionality as the "right click" - Ability to change the type of file - Viewer sectors Version 0.10 (03/13/2005) ------------------------- - Separation of the modes of import and export - Prevents a file to consider starting with 128 bytes to zero as having a header AMSDOS (little bugg ...) Version 0.11 (29/03/2005) ------------------------- - Added a file viewer or hex basic mode if the file is detected as such, and video memory screen mode cpc. - Fixed a small bugg when creating the header for AMSDOS files with numbers in the name. Version 0.12 (04/04/2005) ------------------------- - Ability to change the height / width of the display in the viewer File mode video memory screen cpc (mode "flat") - Ability to save the screen display mode in the video memory cpc (mode "flat") - Fixed a small bugg when importing a file containing header AMSDOS which you want to change the settings (start / entry point) Version 0.12b (05/04/2005) -------------------------- - Removed a small bugg in the viewer of files: the header AMSDOS was included in the visualization Version 0.12c (15/04/2005) ------------------------- - Force the number of tracks to 40 if it is greater than 40 when reading a file. DSK Version 0.13 (14/11/2005) ------------------------- - Taking into account the special format of PCW (9 sectors 1 to 9). - Prohibition of multiple copies of the same file on a floppy disk. - Fixed bugg backup image files format EXTDSK. Version 0.14 (19/11/2005) ------------------------- - Visualization possible format file format Dams or disassembled. Version 0.14b (02/12/2005) ------------------------- - Allow to create disks more than 42 tracks (use blocks AMSDOS up to 255 instead of 188). - Added confirmation read and output when the last disk change has not been saved. Version 0.14c (04/01/2006) -------------------------- - Added filename in the display window. - Fixed a small bugg display the length of a file on a right click. - Fixed bugg display in the disassembler. - Fixed bugg display floating point values ??in the basic viewer. Version 0.14d (not releasée) ---------------------------- - Fixed bugg in déssassembleur (instructions # DD / # FD # CB ...). - Fixed bugg display in the viewer in "listing". Version 0.15 (15/08/2006) ------------------------- - Fixed some texts in French remained in the interface. - Added character '_' after a label "reserved" (READ, WRITE, END) mode "Dams". - Simultaneous handling of two DSK files. - Ability to change the height / width display screen in "standard". - Ability to change the palette display screen. - Options to read / write directly to a 3.5-inch disk Version 0.15b (21/08/2006) -------------------------- - Fixed bug "cancel" button in the direct writing to A: - Fixed bugs listings viewer files BASIC / ASCII - Automatic conversion of accented characters CPC to PC (Chart mode) - Export possible listings in text mode - Striping files. DSK non-interlaced on request. - Display of file. WIN OCP - Automatic reading of the file. PAL corresponding to a file. SCR or a file. visu WIN mode "screen". - Automatic display files BASIC. Or WIN. SCR Version 0.15c (15/09/2006) -------------------------- - Fixed bug run "xxx in the basic viewer. - Fixed a bug that would crash the viewer mode Dams (exceeding the number of characters in a label) - Fixed a bug in the areas of reading size! = 2 - Display basic listings in protected (unencrypted) - Passage of the screen size limit of 80 columns to 128 columns (in viewer mode video memory cpc). Version 0.16 (12/24/2006) -------------------------- - Fix for access drives 5 "1 / 4 (problem of signal READY) - Fixed bug when writing sectors of size! = 2 - Ability to view the files on DSK no "standard" - Ability to view files larger than 64KB - Ability to save a file in a text file via DAMS the viewer of files. Version 0.17 (06/05/2010) ------------------------ - Fixed bug when formatting a DSK - Fixed bug on non-standard file names Version 0.18 (07/28/2010) ------------------------- - Added the-I command line - Added "Compare" button that allows the comparison of two or DSKs files on two DSKs Version 0.19 (12/24/2010) ------------------------- - Location of the program in Spanish - Fixed bug with changing the number to use a file - Fixed display bug (update list file) of the function "Show directory Version 0.19b (01/18/2011) -------------------------- - Fixed bug in length when exporting files without headers Version 0.20 (08/31/2011) ------------------------- - Fixed a bug when exporting files without headers - Fixed minor text localized (Fr / En / Sp) of the application - Added "drag'n'drop" files and. DSK - Added start address in the display "déssassemblée" Version 0.20b (08/19/2011) -------------------------- - Fixed bug in management numbers of users files. Version 0.20c (27/09/2011) -------------------------- - Fixed bug in rename files. - Show deleted files in red (USER 229). - Can permanently delete files. Version 0.20d (29/09/2011) -------------------------- - Fixed bug in delete files. Version 0.20e (18/11/2011) -------------------------- - Fixed bug in formating the dsk in the second window - Fixed bug in viewing protected basic files Version 0.20f (24/11/2011) -------------------------- - Fixed bug when using special characters in file names (#$%&...) - Fixed bug when copying/displaying files (problem on file size) Thanks to Ramlaid for his permission to use the code DamsConverter, and Targhan, Longshot and Kukulcan for their many buggs-report, Simon Owen for his fdrawcmd.sys at Lex Sparrow for his translation into Spanish, and to all users! For additional information, report or other buggs send me a message at the following address: ludovic.deplanque (at) libertysurf (dot) fr or go visit my web page: http://demoniak-contrib.forumactif.com